Varnish Thinner 0.3L

Varnish Thinner 0.3L allows for the optimal use of the Bejan Topcoat Varnish cellulose lacquer. This complementary product gives you complete control over the varnish fluidity. It allows you to adjust the viscosity of the mixture according to your preferred working technique. Packed in practical 0.3L containers, it is an affordable and extremely useful product in any lure-building workshop.

Why you need Varnish Thinner in your workshop:

• Perfect Application with Airbrush or Spray Gun: If you prefer spraying over dipping, adding the thinner in a 30%–50% ratio (depending on the nozzle size used) will provide the ideal fluidity for a fine and uniform atomization, without the risk of clogging the nozzle.

• Ultra-Thin Coats and Zero Bubbles: Thinning the varnish allows you to apply extremely fine coats. This technique is ideal to minimize the risk of air bubbles to the absolute maximum. You will achieve a perfectly glassy surface, especially on complex shapes.

• Varnish Regeneration (Save Money): Over time and with repeated use, the varnish in the jar or can tends to thicken due to the natural evaporation of solvents. A few drops of this special thinner will instantly restore the original fluidity, considerably extending the lifespan of your varnish.

• Application and Safety Recommendations:

  • High Volatility: The formula is highly volatile, designed for fast drying of the coats.

  • Safety Measures: Due to the specific solvent odor and rapid evaporation, it is recommended to use this product exclusively outdoors or in very well-ventilated spaces, using an appropriate protective mask.